一学就会的软路由OpenWrt更换源教程

简介

我们玩OpenWrt时最常见的一种操作就是更换自带的源，比如OpenWrt默认的软件源为openwrt.org，在国内速

度是很慢的，经常会无法正常更新，所以我们需要更换到国内源。

教程

打开openwrt系统后，系统 >> TTYD 终端

登录终端命令行

直接修改配置文件

vi /etc/opkg/distfeeds.conf

下面是根据x86架构，请替换下面的源的架构为你自己的

aarch64_cortex-a53
aarch64_cortex-a72
aarch64_generic
···

先按住键盘D键不松，删除干净，再按 i 键 插入下面的源，这里我提供几个

腾讯云OpenWrt源

src/gz openwrt_core https://mirrors.cloud.tencent.com/openwrt/releases/22.03.5/targets/x86/64/packages
src/gz openwrt_base https://mirrors.cloud.tencent.com/openwrt/releases/22.03.5/packages/x86_64/base
src/gz openwrt_luci https://mirrors.cloud.tencent.com/openwrt/releases/22.03.5/packages/x86_64/luci
src/gz openwrt_packages https://mirrors.cloud.tencent.com/openwrt/releases/22.03.5/packages/x86_64/packages
src/gz openwrt_routing https://mirrors.cloud.tencent.com/openwrt/releases/22.03.5/packages/x86_64/routing
src/gz openwrt_telephony https://mirrors.cloud.tencent.com/openwrt/releases/22.03.5/packages/x86_64/telephony

中科大OpenWrt源

src/gz openwrt_core http://mirrors.ustc.edu.cn/openwrt/releases/22.03.5/targets/x86/64/packages
src/gz openwrt_base http://mirrors.ustc.edu.cn/openwrt/releases/22.03.5/packages/x86_64/base
src/gz openwrt_luci http://mirrors.ustc.edu.cn/openwrt/releases/22.03.5/packages/x86_64/luci
src/gz openwrt_packages http://mirrors.ustc.edu.cn/openwrt/releases/22.03.5/packages/x86_64/packages
src/gz openwrt_routing http://mirrors.ustc.edu.cn/openwrt/releases/22.03.5/packages/x86_64/routing
src/gz openwrt_telephony http://mirrors.ustc.edu.cn/openwrt/releases/22.03.5/packages/x86_64/telephony

清华OpenWrt源

src/gz openwrt_core https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/22.03.5/targets/x86/64/packages
src/gz openwrt_base https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/22.03.5/packages/x86_64/base
src/gz openwrt_luci https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/22.03.5/packages/x86_64/luci
src/gz openwrt_packages https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/22.03.5/packages/x86_64/packages
src/gz openwrt_routing https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/22.03.5/packages/x86_64/routing
src/gz openwrt_telephony https://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/22.03.5/packages/x86_64/telephony

OpenWrt官方源

src/gz openwrt_core https://downloads.openwrt.org/releases/21.02.0/targets/rockchip/armv8/packages
src/gz openwrt_base https://downloads.openwrt.org/releases/21.02.0/packages/aarch64_generic/base
src/gz openwrt_luci https://downloads.openwrt.org/releases/21.02.0/packages/aarch64_generic/luci
src/gz openwrt_packages https://downloads.openwrt.org/releases/21.02.0/packages/aarch64_generic/packages
src/gz openwrt_routing https://downloads.openwrt.org/releases/21.02.0/packages/aarch64_generic/routing
src/gz openwrt_telephony https://downloads.openwrt.org/releases/21.02.0/packages/aarch64_generic/telephony

我自己架构是aarch64_generic，我用了的第三方软件源

src/gz openwrt_base http://mirrors.pku.edu.cn/immortalwrt/releases/21.02.1/packages/aarch64_generic/base
src/gz openwrt_luci http://mirrors.pku.edu.cn/immortalwrt/releases/packages-18.06-k5.4/aarch64_generic/luci
src/gz openwrt_packages http://mirrors.pku.edu.cn/immortalwrt/releases/21.02.1/packages/aarch64_generic/packages
src/gz openwrt_routing http://mirrors.pku.edu.cn/immortalwrt/releases/21.02.1/packages/aarch64_generic/routing
src/gz openwrt_telephony http://mirrors.pku.edu.cn/immortalwrt/releases/21.02.1/packages/aarch64_generic/telephony

插入完成之后，按ESC，再输入 进行保存

:wq

最后更新源

opkg update